WOLF-30DP
Overview
XMC Development Carrier for XMC-TK1-FGX
This XMC development board is compatible with WOLF’s XMC-TK1-FGX modules. The carrier board provides multiple video input and output connectors.
This development board allows the mounted XMC board to be accessed via PCIe using 8 lanes on a 16 lane PCIe edge connector.
Additional Features:
- SDI inputs and outputs
- Analog inputs
- HDMI output
- Mini USB
- LAN connector for GigE Ethernet
- UART connectors (COM_A and COM_B)
- VPWR selector switch (+5 or +12V)
- Push buttons for Reset, ON Key, Forced Recovery
Block Diagram
The block diagram illustrates an XMC-TK1-FGX development carrier, highlighting the PCIe host interface and the breakout of SDI, analog inputs, HDMI, and control/debug interfaces. It emphasizes how the carrier exposes the mounted module’s capture and processing pipeline for bring-up, recovery, and integration testing.
Features
WOLF-30DP is an XMC development carrier board designed for WOLF XMC-TK1-FGX modules, providing a bench platform to access video I/O and control interfaces while running the XMC module through a host PC. The board supports a PCIe x8 interface through a 16-lane PCIe edge connector and includes common bring-up controls and connectors used during development and integration testing.
Video I/O Features
- SDI inputs and outputs
- Analog inputs
- HDMI output
Connectivity / System Management
- PCIe x8 interface to host PC via x16 PCIe edge connector
- Mini USB
- GigE Ethernet (LAN connector)
- UART connectors (COM_A and COM_B)
- VPWR selector switch (+5V or +12V)
- Push buttons for Reset, ON Key, and Forced Recovery
Mechanical / Open Systems Architecture
- Bench development carrier for XMC- TK1- FGX module bring- up
- Provides connector breakouts and controls for lab validation workflows
Specifications
Key configuration and performance parameters for WOLF-30DP are summarized below for quick comparison. Values shown reflect the standard module configuration; contact WOLF if you need a tailored build or a specific payload profile.
Configuration Guide
This development carrier is typically ordered with configuration-dependent connector population and lab bring-up options for XMC-TK1-FGX integration. Contact Sales for the latest ordering numbers and available options.
Some configuration options for this board include:
- Video I/O breakout population (HDMI, SDI, and analog I/O as supported by the installed module)
- Control and debug connector population (USB/UART and recovery/bring-up controls)
- Host integration via PCIe x8 on the x16 edge connector (system dependent)
Representative ordering numbers
| Ordering Number | Description |
|---|---|
| Contact Sales | XMC-DEV-TK1-FGX ordering and configuration options |
Related Products
FAQ
WOLF-30DP is an XMC development carrier designed for the XMC-TK1-FGX module, providing bench access to video I/O and bring-up controls while running through a host PC.
It is typically used to:
- Validate SDI ingest/output and analog inputs
- Exercise HDMI output paths
- Use recovery and control functions during early software bring-up
This carrier includes controls that are often critical during early development:
- Reset, ON Key, and Forced Recovery buttons
- VPWR selector (+5V or +12V)
- UART access for console/debug
These are the practical tools that enable recovery from misconfiguration and accelerate iteration cycles during Tegra-based platform development.
It exposes:
- SDI inputs and outputs
- Analog inputs
- HDMI output
- Mini USB
- GigE Ethernet (LAN connector)
- UART connectors (COM_A and COM_B)
- PCIe x8 via x16 edge connector
This set is designed to support a complete bench pipeline from ingest to processing to output.
Dev carriers are commonly ordered as configuration-driven tools.
Contact Sales for ordering information and available configuration options.